Filter
Top Products
This Kit is provided to relieve excessive pressure on loader control valve when
other implements are used while loader is still attached to tractor.
ITEM QTY. DESCRIPTION
1 1 Power Beyond Plug Assy.
2 1 Elbow 90˚ 9/16” ORB to 9/16” JIC
3 1 Hydraulic Hose 1/4” - 9/16” JIC Female
4 2 Straight Fitting 9/16” JIC male to 3/8” Pipe male
5 1 Quick Coupler Assy.
Kit Includes:
IMPORTANT: When Loader hydraulics are disconnected from tractor, the tractor
hydraulic circuit must be completed by connecting pressure port to return port.
Failure to do this will cause serious damage to tractor hydraulic pump.
INSTALLATION INSTRUCTIONS
1. Remove plug from right side of valve.
2. Install power beyond plug in valve.
3. Install 90˚ elbow in power beyond plug.
4. Attach hydraulic hose to 90˚ elbow and route hose to
return outlet on tractor.
NOTE: Additional fittings are required to attach hose to
return outlet on tractor.
5-9 POWER BEYOND KIT
31
*NOTE: Use the Power Beyond Plug Supplied with the
Walvoil Valve. DO NOT use the plug supplied in the pop-
wer beyond kit, it is only used with the Danfoss Valve.
TO PRESSURE
TO TANK
1
2
3
4 5 4
TO
RETURN
OUTLET
Figure 5-3