Filter
Top Products
Setting Preset Stations
Up to 30 stations (six FM1, six FM2, six AM, six XM1
and six XM2) can be programmed on the six numbered
pushbuttons.
To program either radio:
1. Turn the radio on.
2. Press BAND to select FM1, FM2, AM, or XM1™ or
XM2™ (if equipped).
3. Tune to the desired station.
4. Press EQ to select the equalization.
5. Press and hold one of the six numbered
pushbuttons until the radio beeps once. When
that numbered pushbutton is pressed again, the
station and equalization that were stored, returns.
6. Repeat the steps for each pushbutton.
Setting the Tone (Bass/Treble)
e
(Bass/Treble): Press and release until BASS or
TREBLE displays. Turn
e to increase or to decrease
the bass or treble.
Press and hold
e to adjust the bass and treble to the
middle position. The radio beeps once.
To adjust all tone and speaker controls to the middle
position, press and hold
e when no tone or speaker
control displays. ALL CENTERED displays and the
radio beeps once.
EQ (Equalization): Press to select customized
equalization settings.
To return the bass and treble to the manual mode,
press and release until BASS or TREBLE displays.
3-86