Filter
Top Products
7
© BMW AG, Munich 01 29 0 409 384 04.2006 (Z/Z)
5. To install the license plate holder
Mark the hole (4) on the tailgate bottom
section (1) as follows:
-In the middle
- Approx. 40 mm from the reference line (2)
Drill through the tailgate bottom section (1) at the
drilling position (4) using a 12 mm step drill bit.
Complete the anti-corrosion treatment process.
Route the sensor cable (3) through rubber
grommet N and insert rubber grommet N in the
tailgate bottom section (1).
Unscrew the opener (1) of the tailgate bottom
section.
Route sensor cable (3) through the grommet (2)
into the trunk.
Secure license plate holder E to the tailgate
bottom section (1) using the license plate
screws (2).
Secure the license plate (2) to license plate
holder E using the license plate screws (1).
053 0826 Z
40mm
1
N
3
2
4
3
1
2
4
053 0827 Z
053 0828 Z
2
E
1
053 0829 Z
2
1
1
E