Filter
Top Products
NavigationEntertainment Driving tips
159
Reference At a glanceControlsCommunicationsMobility
Selecting a channel
Selecting a channel
1. "Radio"
2. "Satellite radio"
3. Select "All Channels" or the desired cate-
gory.
4. Select desired channel.
Storing a channel
1. "Radio"
2. "Satellite radio"
3. Open "All Channels" or the desired cate-
gory.
4. Open "Options".
5. "Store Channel"
6. Call up the desired memory location.
The channel is stored. The channels of the last
selection criterion are displayed once again
after a short time.
Displaying information about another
channel
Information can be displayed about a channel
that is not being played.
1. Highlight the channel about which you wish
to display information.
2. Open "Options".
3. "Channel info"
Changing the channel using the button
next to the CD/DVD drive
Press the button for the corresponding
direction.
The system changes to the next enabled chan-
nel.
Notes
If no signal can be received for more than 4 sec-
onds, a message is displayed on the Control
Display.
Reception may not be possible for certain
reasons, e.g., environmental influences or
topographical conditions. The satellite radio
has no influence on this.
The signal may not be available in tunnels or
underground garages, next to tall buildings,
near trees, mountains or other sources of radio
interference.
Reception is usually possible again as soon as
the signal is available again.<
Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AGOnline Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG