Filter
Top Products
To begin using your V6,
just follow these simple steps
:
1 Plug the small end of the power cord
into the side jack of the detector, and
plug the large end of the power cord
into your car’s lighter socket.
2 Mount your V6 on the windshield
using the supplied windshield mount.
3 Press the PWR button, located top left,
to turn the V
6 on.
4 Press and hold the Volume/Mute
button to adjust the volume.
Please read the manual to fully understand
your V
6’s operation and features.
QuickMount Slot
Insert the V
6’s adjustable Windshield
mount into this slot. Page 7
QuickMount Button
Press the button, and slide the Windshield
mount into one of its four locking
positions. Page 7
City Button
Switches between
City and Highway
settings. In general, we
recommend
Highway. Page 9
Power
Press the PWR button to turn the V
6 on
or off.
AutoMute
Your V
6’s patented AutoMute
automatically reduces the volume level of
the audio alert after a brief period. If you
prefer, you can turn AutoMute off. Page 8
Programming
Your V
6 is ready to go, just plug it in and
turn it on. But you can also easily change 6
features for your preferences. Page
12-14
Quick Reference Guide
4
Radar Antenna and Laser Lens
The rear panel of your V
6 should have
a clear view of the road ahead. For best
performance, do not mount the V
6
directly behind windshield wipers
or tinted areas. Page 6
Alphanumeric Matrix Display
Your V
6’s display will show Highway or
City as its power-on indication. If you
prefer, you can choose other power-on
indications. Page 12-14
During an alert, the display will
indicate radar band, and a precise bar graph
of signal strength. Page 10
NOTE: In the Dark Mode the display
will not light during an alert. Page 9
Rear Laser Port
Receives laser signals from behind the
vehicle.
Earphone Jack
Accepts standard mono 3.5mm earphone.
Brightness Button
Press to adjust display brightness. There are
three brightness settings, plus Dark Mode.
In the Dark Mode, the power-on
indication will be changed to a “HD
” or
“CD” (indicating Highway Dark or City
Dark). In the Dark Mode, the V
6’s meter
will not display during an alert, only the
audio will alert you.
Page 9
Power Jack
Plug the power cord into this connector.
Page 6
Volume and Mute Button
Press and hold the Volume/Mute button to
adjust the alert volume level. Page 8
Briefly press this button to silence the
audio for a specific alert. (The audio will
alert you to the next encounter.) Page 8
5