Beltronics LP904 Radar Detector User Manual


 
Congratulations on your
purchase of BEL LaserPro
904.
BEL LaserPro
904
is designed as the ultimate in
traffic Laser defense given that it
produces countermeasures
beyond the function of
traditional Laser detectors by
blocking the Laser beam that is
targeted at your vehicle.
LaserPro
904 is comprised
of sophisticated, exterior
mounted front and rear Laser
transceivers. You can operate
LaserPro
904 as a stand-alone
unit, and know you’re protected
beyond traditional “Laser
detectors”, or you can
supplement LaserPro
904’s
capabilities with a dash or
Remote Installation
Radar/Laser/Safety detector
from BELTRONICS.
Please Note:
Operating BEL LaserPro
904 is
not a license to speed. Observe
the local speed limits and laws
governing the user of a Laser
defense product. Use of
LaserPro
904 is prohibited in
some states. Check your local
and state laws before use or call
BELTRONICS:800-939-7373.
The Three transceivers of
LaserPro
904 must have a
clear view of the road in front
and behind, and must be
installed level to the road in
order to work properly. Ensure
your BEL LaserPro
904 is
correctly positioned after it is
installed.
IMPORTANT Notice
It is recommended that
LaserPro
904 be professionally
installed. New car dealers, and
many reputable auto shops or
car stereo stores should be able
to install LaserPro
904. Call
BEL toll-free at 800-737-9393,
for the name of an authorized
dealer near you.
Installing LaserPro
904 without
expertise in automotive
electronic installations could
cause personal injury, or damage
to the unit or your vehicle. If
your vehicle is damaged during
installation, its safety systems
may be compromised, which
could cause personal injury or
property damage.
Congratulations and Important Notice
2
8804_LaserPro904Manual 5/2/02 1:24 PM Page 2 Rev 7 Mac