Filter
Top Products
© 2010 Baja, Inc. All Rights Reserved.
11 — English
OPERATION
approximately 2 in. below the top of the fuel tank opening.
Replace fuel tank cap and turn clockwise to secure.
WARNING:
must be replaced with an original manufacturer’s replace
problem before using the product. Failure to do so could
WARNING:
explode, resulting in serious personal injury.
WARNING:
proper performance of the mini bike before riding can
result in serious personal injury.
PRE-RIDE INSPECTION
ITEM TO
CHECK
ITEM MUST PERFORM AS
FOLLOWS:
Steering
ment; no play or looseness.
Brakes
brake force.
Tires Proper air pressure; enough tread depth;
no cracks, rips, or other damages.
Fuel Enough fuel for the intended trip.
Fuel cap No damage to fuel tank or cap; fuel tank
cap closed securely.
Engine stop
switch
Proper operation of switch. Start engine,
then press stop switch. Engine should
stop.
Engine
lubricant
ing engine oil dip stick. The engine lu
bricant should be between the minimum
and maximum lines.
Throttle Proper free play of throttle grip; smooth
response; quick return to idle position.
General
condition
Bolts and nuts are tight; no rattle from
any parts of the engine when running;
frame cracks.
STARTING THE ENGINE
Place the engine switch in the ON position.
Pull the pull cord sharply until the engine runs. Return the
cord gently to the unit. Do not allow it to snap back.
Allow engine to warm,
OFF position.
NOTE:
between the ON and OFF positions.
WARNING:
Always open the throttle gradually when you want to ac
celerate. Opening the throttle suddenly could cause the
of the mini bike causing serious personal injury.
WARNING:
Always keep both hands on the handlebars and both
feet on the foot rests of your mini bike during operation.
to control the mini bike or could cause you to lose your
the footrest, you may come in contact with the mini bike,
ground, obstacles, etc., which could cause an accident
and result in serious personal injury.
STOPPING THE ENGINE
Rotate the throttle grip forward (away from you) to slow
down the engine.
Place the engine switch in the OFF position.
OFF position.