Filter
Top Products
AviStart 6001 Owner's Manual
Remote-Controlled Accessory Output
This output allows you to add an optional remote-controlled accessory to your
system such as a window roll-up, garage door opener or fuel door release. To
activate your optional accessory, see the "Programming Table for Remote
Controls" on page 15.
Zone
2
Impact Sensor
The Zone
2
Impact Sensor has two individual vibration/impact sensing zones.
Zone #1
If a less threatening vibration or impact is detected, the siren will issue 2
warn-away chirps. A second violation will also issue 2 warn-away chirps. A
third violation will, within 30 seconds, automatically activate the alarm. The
siren will sound and the lights will flash. This zone can be programmed so
that the system will only issue warn-away chirps when less threatening
intrusions are detected, but never actually trigger the alarm. (See
"Programming Table for System Features" on page 14.)
Zone #2
If a more threatening vibration or impact is detected at any time, the siren and
lights will activate instantly.
Previous Intrusion Alert
If the vehicle had been tampered with and the alarm had been triggered, the
siren will chirp 3 times upon remote disarm instead of the usual 1 chirp.
Specific Intrusion Identification
If the alarm had been triggered in your absence, the siren will chirp 3 times
upon remote disarm (Previous Intrusion Alert). When you enter the vehicle
and turn the ignition "ON," the LED will flash in cycles to specifically identify
which zone triggered the alarm.
LED Zone
1 flash...1 flash... Impact sensor / optional sensor input
2 flashes...2 flashes... Hood trigger
3 flashes...3 flashes... Door trigger
4 flashes...4 flashes... Trunk trigger
7