Filter
Top Products
1144
©
2004 Directed Electronics, Inc.
A zone is represented by the number of LED flashes used by the
system to identify a particular type of input. Standard input assign-
ments are listed in the following table, along with spaces to write
in any optional sensors or switches that you have had installed.
ZZOONNEE
(Number of
DDEEAALLEERR--IINNSSTTAALLLLEEDD
LED Flashes)
DDEESSCCRRIIPPTTIIOONN OOPPTTIIOONNSS
11
Instant trigger for optional
hood or trunk pins
22
A heavier impact detected by
the on-board shock sensor
33
Door switch trigger
55
Ignition trigger
NNOOTTEE::
The LED does not report when the warn away response has been
activated; it only reports triggered sequences.
SStteeaalltthh CCooddiinngg
™
TTeecchhnnoollooggyy
The receiver and remote use mathematical formulas called algo-
rithms to change their codes each time the remote is used. This
Stealth Coding
™
Technology has been developed to increase the
security of the unit. By following this set code sequence, the
receiver and remote stay synchronized, even if the remote is used
out of range of the vehicle. If, however, the remote is pressed many
times out of range, or the battery is removed, the remote may get
temporarily out of sync and fail to operate the system. To resyn-
TTaabbllee ooff ZZoonneess