Filter
Top Products
1100
©
2004 Directed Electronics, Inc.
Valet Mode prevents your security system from arming and
triggering either automatically or with the remote.
In Valet Mode, the system will not arm, but all convenience
functions (door locks, trunk release, etc.) remain operational.
This feature is useful when washing or servicing your vehicle.
You can access Valet Mode either manually or from the remote.
To enter or exit Valet Mode with the Valet switch:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the
Valet switch within 10
seconds.
The status LED will light solidly if you are entering Valet Mode and
will turn off if you are exiting Valet Mode.
You can also enter or exit Valet Mode by using the remote :
1. Open any vehicle door.
2. Press .
3. Press .
4. Press again.
RReemmoottee--CCoonnttrroolllleedd VVaalleett
DRW-35
VVaalleett MMooddee