Audiovox RVMPKG2 Automobile Accessories User Manual


 
6
2. How to view the rear observation camera image:
A. The monitor will display the rear observation camera image whenever
the vehicle is shifted into the reverse gear. The rear observation camera
image turns off automatically any time the gear selector is moved out of
the reverse position.
B. If you want to view the rear observation camera image at any other time,
press and hold SW #3 on the rearview mirror. The image will remain on
as long as SW #3 is held on. Releasing the SW #3 will turn off the
image.
C. The mirror/monitor can be used as regular glass rearview mirror.
3. How to view the Navigation image:
Press SW # 2 to see the navigation display continuously. Press SW #2 again to
turn off the navigation display. If you want to engage the navigation voice
command timed display, make sure SW#2 is pressed until the image is gone. Then
press SW# 1, the LED will turn yellow and the navigation image will appear for
the preset time when- ever the navigation voice command is heard (30sec,2.5
minutes or 5 minutes).
III. How to play an external audio or video signal
1. You must always engage the vehicle’s parking brake to display any external
input signal.
2. Press SW #1 once to turn on the external signal input. The image will be
displayed as long as the ignition is turned on and the parking brake is on.
3. To turn off the external signal input, press SW #1on the mirror. The external
signal input will also be turned off if the parking brake is released or the
ignition key is turned off.
IV. Cellular Phone Hands -Free Operation
1. Attach the round metal adhesive disc to the back of your mobile phone while not in
use, and then attach the mobile phone adhesive magnetic seat to your selected spot
of the dash area. By placing your cell phone with the metal disc over the center of
the magnetic seat, your cell phone will be attached tightly to the dash.
2. Plug in the 2.5mm 3 bars hands-free cable into your cell phone headset jack. The
other end of this cable should be connected to the control box mounted under the
dash area. Note. If your cell phone does not have a 2.5mm with 3 bars headphone
jack then an adapter must be used for your particular cell phone. Also not all cell
phones are compatible with this mirrors hands free circuit.