Filter
Top Products
Installation 1: View of the Suction cup
page 4
page 5
Installation 1: Suction cup
1. Locate and clean suitable mounting location on glass near baby seat side of
vehicle.
2. Attach the camera suction cup to the selected mounting location.
3. Connect the camera cable to the extension cable provided with the rear
view mirror.
4. Route the camera cable up to and under the headliner of the vehicle.
5. Route the extension cable up to the rearview mirror control box
and plug in the 4-pin connector.
.
page 6
Installation 2: View of Headliner pins