Filter
Top Products
H: LCD Brightness Control
I: Internal Infra-RED Receiver for use with Navigation System Remote Control.
J: Power LED (Red when Power is on)
K: Display Timer Slide Control Switch : (optional Navigation System required)
Refer to Page 5 for detailed operation notes.
L: Internal Speaker Switch: Used to turn mirror speaker on/off. Move this switch
to the Off position when using the external speaker interface included with the
optional Navigation System.
II. Operation
The Mirror/monitor is automatically activated every time the Ignition key
is turned on. The mirror/monitor turns off every time the Ignition is
turned to the off position.
1. Rear Observation Camera (optional)
A. If a rear observation camera has been installed, the monitor will
automatically display the rear observation camera image whenever
the vehicle is shifted into reverse gear. The rear observation camera
image turns off automatically any time the gear selector is moved out
of the reverse position.
B. If you do not have an optional interior view camera installed,
pressing the “CAM” button at any time will display the image from
the rear observation camera onto the LCD for as long as the “CAM”
button is held.
2. Interior View Camera (optional)
A. If an interior view camera has been installed, pressing the “CAM”
button at any time will display the image from the interior view
camera onto the LCD for as long as the “CAM” button is held.
3. Navigation Image (optional Navigation System required)
The Navigation Image is the default mode, and will only be overridden
when the vehicle gear selector is moved into reverse, or if the CAM
button on the mirror is pressed.
Some operators may find that leaving the Navigation Image on the LCD
monitor at all times becomes a distraction while operating their motor
vehicle. For the convenience of those operators, a ‘Display Timer Slide
Control Switch’ has been added to the mirror.
A. When the Slide Control Switch is moved to the far right end position,
the Navigation image will remain on at all times.
B. When the Slide Control Switch is moved to the far left end position,
the Navigation image will remain off at all times.
4