Page 9
OPTIONAL DEVICE OUTPUT (CHANNEL 3)
Controlled By: o Option Button, o Both Lock & Unlock Button, o Both Option & Lock
Button, or Both Option and Unlock Button.
This security system is equipped with an output which will activate when the appropriate
transmitter button is depressed for four seconds. Optional devices that may be connected to
this channel are:
o Remote Electric Trunk Release
o Remote Car Starter
o Remote Window Closure
o Remote Garage Door Interface
NOTE: In addition there may be a second optional feature connected to your system that
when the same transmitter button is pressed and released 2 times within 3 seconds
(double pressed), the second optional feature will activate. This output is typically
used for a remote start option and will likely prevent inadvertent activation of the
remote start device if young children are playing with the hand held transmitter.
If your vehicle is not equipped with an electronic trunk release switch, or other option listed,
this feature may have been connected to another accessory. Please ask your dealer for
further information.
ADDITIONAL REMOTE FUNCTION (CHANNEL 4)
Controlled By: o Option Button, o Both Lock & Unlock Button, o Both Option & Lock
Button, or Both Option and Unlock Button.
This security system has an additional feature that can be connected to a number of
different optional accessories. Some of the more common uses for this channel are:
o Remote Car Starter
o Remote Window Closure
o Remote Garage Door Interface
To remotely operate the device indicated, momentarily press, or press and hold the appro-
priate transmitter button(s) as indicated above.
ADDITIONAL REMOTE FUNCTION (CHANNEL 5)
Controlled By: o Option Button, o Both Lock & Unlock Button, o Both Option & Lock
Button, or Both Option and Unlock Button.
This security system has an additional feature that can be connected to a number of
different optional accessories. Some of the more common uses for this channel are:
o Remote Car Starter
o Remote Window Closure
o Remote Garage Door Interface
To remotely operate the device indicated, momentarily press, or press and hold the
appropriate transmitter button(s) as indicated above.