Filter
Top Products
-2-
Locking / Arming (Active)
1. Turn off the engine, exit the vehicle, and close all doors.
2. Press and release the Lock button on the keychain transmitter. The doors will lock, the
LED will begin to flash slowly and the vehicle’s parking lamps will flash once, if the optional
parking light flasher was added.
Locking / Arming (Passive)
Passive (Automatic) arming and locking is a selectable feature and may not be activated in
your vehicle.
1. Turn off the engine, exit the vehicle, and close all doors.
Note: Automatic passive arming will not begin until all doors are closed, allowing passenger
to exit the vehicle at their convenience.
2. The LED will begin flashing rapidly, 30 seconds later the system is armed, the vehicle’s
parking lamps will flash one time, if the optional parking light flasher was added.
NOTE: The keyless entry control module can be programed to either;
A. Automatically lock the doors during step 2 above.
or....
B. Only lock the doors when step 3 is executed.
3. If you wish to Lock/Arm the system immediately, simply press and release the Lock button
on the keychain transmitter. The doors will lock, the LED will begin to flash and the vehicle’s
parking lamps will flash once, if the optional parking light flasher was added.
Protection While The System Is Armed
Whenever the system is armed, the vehicle’s starter will be bypassed (optional). If a thief
should attempt, the vehicle can not be started.
Unlocking / Disarming
1. As you approach the vehicle, press and release the Unlock button on the key chain
transmitter.
2. The LED will turn off, the vehicle’s parking lamps will flash 2 times, if the optional parking
light flasher was added, the doors will unlock, and the vehicle’s interior courtesy light will
turn on for approximately 20 seconds, indicating that the system is disarmed.
Note: If the passive arming feature is activated in your vehicle, the LED will begin to flash
rapidly when the unlock button is pressed. Opening any door will suspend the arming
process.
NOTE: If the optional 2-step unlock feature was installed, then only the driver's door will unlock
during step 1 above. To unlock all doors, press the unlock button of the transmitter a
second time.
3. Never attempt to disarm the system from a distance that prevents you from opening a door
within 30 seconds, when the system is programmed for passive arming as the system will
begin to re-arm until a door is opened. Opening the door will suspend the passive arming
cycle.