Audiovox PRO9232A Automobile Alarm User Manual


 
128-6626
7 of 8
To operate the optional accessory;
1. Press the lock, then unlock, then lock buttons on your keychain transmitter within
3 seconds.
2. The optional accessory will immediately activate.
OPTIONAL AUTO LOCK/UNLOCK FEATURE :
If your existing factory installed keyless entry system did not include the automatic
door lock and unlock feature, then this feature can be activated from the PRO 9232
upgrade module. When this accessory has been added, any time the ignition key
is turned to the on position
and
all vehicle doors are closed, the doors will lock in
4 seconds. Additionally, any time the ignition key is turned to the off position, the doors
will unlock.
ELIMINATING THE ARM / DISARM CHIRPS :
The normal arming and disarming confirmation chirps can easily be turned off using
the valet pushbutton switch. To do this;
1. Turn the ignition key on, and then off.
2. Within 10 seconds of turning the ignition key off, press and release the valet switch
3 times.
3. a. If, before proceeding with step 1, the chirps were on, then you will hear 2 chirps
to indicate that the chirps have been turned off.
b. If, before proceeding with step 1, the chirps were off, then you will hear 1 chirp
to indicate that the chirps have been turned on.
4. Whenever power to the system has been disconnected ( for repair or service to the
vehicle ), the chirps will be activated when the power is re - connected. To turn the
chirps off, simply execute steps 1 through 3 above.
NOTE : Whenever the Arm/Disarm chirps are by-passed, the 3 chirp defective
zone and the 4 chirp intrusion indicator will always operate. This feature
will always warn you if a door was left ajar when arming, or the vehicle was
tampered with in your absence.
Page 7