Filter
Top Products
Page 2
STARTER INTERRUPT SYSTEM
The Starter Interrupt System automatically prevents your vehicle from being started after your
ignition key is turned off. As an option, if an attempt is made to start the vehicle, the horn or
a siren will be activated if so equipped, until the AS-9950 is disarmed if using positive output.
Using the negative output, the siren will turn off the moment the potential thief stops cranking
the starter.
OPERATION
TO ARM SYSTEM:
When the ignition key is turned to the “off” position, the starter interrupt system is enabled
which is confirmed by a continuously flashing red LED. The system has a low current draw
(less power than your vehicle's clock).
TO DISARM SYSTEM:
Turn your ignition key to ignition position. Turn your secret switch on and off. The system will
disarm, confirmed by the red LED turning off. The vehicle will now start as long as the ignition
key is in the “on” position.
VALET SWITCH:
Turn “off” the hidden toggle switch to allow vehicle to start during extended stop overs such as
the service station, washing, valet parking, etc. Turn “on” the hidden toggle switch to allow the
passive arming operation to continue.
INSTALLATION
Two relays plugged in on the sockets of the relay harness are required to operate this system's
starter interrupt, LED and positive output trigger. One relay can be plugged in the optional
socket location and used for the negative horn output. This optional relay is to be plugged in
only if you want a negative output for horn activation when a theft attempt is made.
MOUNTING VALET SWITCH:
Find a location in an accessible, but hidden area of the passenger compartment to mount the
toggle switch. Drill a 1/4" hole in the chosen area and secure the toggle switch with the hardware
provided.
MOUNTING RED FLASHING LED INDICATOR LIGHT:
Drill a 3/8” hole. Pull the LED. light out of the housing from the backside, and slide the
housing through the 3/8” hole. Now push LED light back in to the housing.