Filter
Top Products
The transmitter incorporates a small red L.E.D. built into the case. This L.E.D. can be used
to indicate battery condition. You will notice a decrease in transmitter range as the battery
condition deteriorates. To replace the battery...
1. Remove the transmitter cover by removing the small screw from the back of the transmitter
case.
2. Remove the discharged battery, making note of the orientation of the + and - contacts,
and dispose of properly.
3. Install the new (type GP23A) battery, taking care to orient the + and - contacts properly.
4. Replace the transmitter cover, taking care not to damage the L.E.D. or switches on the
circuit board.
BATTERY REPLACEMENT: