Filter
Top Products
Page 6
REMOTEP ANICOPERATION
The ARM / DISARM button onyour keychain transmitter also functions as a panicswitch for
use in emergency situations. To use remote panic,
1. Press and hold the ARM / DISARM button on the keychain transmitter for 3 or
more seconds. The alarm will immediately sound.
2. To stop the alarm, press and hold theARM / DISARM button on the transmitter
again for 3 seconds. If the button is not pressed, the alarm will automatically
stop after 30 seconds.
NOTE : All normal transmitter functions will operate in the panic mode.
REMOTETRUNK RELEASE(CHANNEL2 )
This security system is equipped with an on board trunk release relay which will activate
the existing factory installed electronic trunk release mechanism. If your vehicle is not
equipped with an electronic trunk release mechanism, this feature may have been con-
nected to another accessory. Please ask your dealer for further information.
To remotely open the trunk, press and hold button 2 on the keychain transmitter for four
seconds.
ADDITIONALREMOTE FUNCTION(CHANNEL 3)
This security system has an additional feature that can be connected to a number of
different optional accessories. Some of the more common uses for this channel are;
Remote Car Starter
Remote Window Closure
Remote Garage Door Interface
To activate the optional accessory, press both buttons on the keychain transmitter simulta-
neously. The optional accessory will immediately engage.