Filter
Top Products
Page 6
REMOTEPANIC OPERATION
The ARM / DISARM button on your keychain transmitter also functions as a panic switch
for use in emergency situations. To use remote panic,
1. Press and hold the ARM /DISARM button on the keychain transmitter for 3 or
more seconds. The alarm will immediately sound.
2. To stopthe alarm, pressand hold theARM/ DISARM buttonon the transmitter
again for 3 seconds. If the button is not pressed, the alarm will automatically
stop after 30 seconds.
NOTE : All normal transmitter functions operate in the panic mode.
ADDITIONALREMOTE FUNCTION(CHANNEL 2)
This security system has an additional feature that can be connected to a number of
different optional accessories. Some of the more common uses for this channel are;
Remote Trunk Release
Remote Car Starter
Remote Window Closure
Remote Garage Door Interface
To activate the optional accessory, press and hold Button 2 on the keychain transmitter for
4 seconds.