Filter
Top Products
3
1. Open door on O.E. center console. Using a 7mm
socket, remove and discard (2) two screws which
secure lower O.E. console. See Figure 1.
2. Slide console outward from original position and
disconnect wiring from CD player. See Figure 2.
3. Remove and retain (2) two heater vents. See Fig. 2.
4. Remove and retain CD player bezel. Remove by
prying outward to release clips. See Figure 3.
NOTE: If vehicle is equipped with storage
pocket instead of CD player, remove and
retain storage pocket.
II. PREPARATION OF COMPONENTS FOR INSTALLATION
FIGURE 1
FIGURE 2
FIGURE 3