Filter
Top Products
128-8128
19 of 24
Page 19
corner of the screen as shown left. This icon indicates a new battery
shown with 3 bars. As the battery deteriorates, the bars will disappear. 1
bar indicates the battery should be replaced. Replace battery with a fresh
1.5V AAA battery and dispose of the used battery properly.
Other icons that will be displayed at times when certain functions and features
are active in the vehicle or on the remote:
Range Indicator. The range indicator will have bars to the side of the icon if the
unit is out of range.
Vibrate Mode On, this icon will be displayed if you select vibrate instead of
tones. To toggle vibrate on and off, press "F" + Unlock simultaneously.
Alarm Clock. This icon will be toggled on and off when the "F" + Trunk/
Key buttons are pressed simultaneously. The feature must be set in the
feature selection menu of the transmitter.
Timing Count Down:
The unit offers an additional count down timer for situations where an
alert tone may be needed to remind you of something important. Setting
information shown on previous page.
Power Save Feature. Press the "F" and Lock buttons simultaneously to
toggle this feature on and off. With this mode on, the battery in the
transmitter will go into a power down mode when the unit is disarmed.
24 Hour Start Timer. Standing at the vehicle at the time you want it to
start, press the option + lock buttons simultaneously for 1 seconds. The
transmitter will beep and display the 24 hr timer. This is the time the
vehicle will start when you follow the exit procedure. In other words, if you
want the vehicle to start 6AM, at 6AM of any morning, standing at the
vehicle, press and hold the option + lock buttons until you hear a beep
and the 24 hr timer is displayed. This establishes a starting time. The unit will
start at the prescribed time once only. This function must be selected each time
you want the vehicle to start. To activate this function, (a) Turn the ignition switch
off. (b) Within 10 seconds of step (a), depress and hold the brake pedal, while
pressing the key icon transmitter button 2 times. (c) the unit will emit 2 chirps,
the transmitter will beep and the start timer icon on the display will remain on.
The vehicle will start at the set time. To toggle this feature off, press the option +
lock buttons simultaneously until a beep is heard and the 24 hr timer turns off.
Temperature Start Mode. This icon will appear when the temp start mode is
activated. The vehicle will start one time automatically when the temperature
reaches 0*. Caution, Be certain vehicle is outside before activating this
mode. To toggle this feature on of off, from the Locked/Armed mode,
press the Option and Lock buttons simultaneously. (Available on certain
remote start models only).
Throughout this manual you will find screen shots where they apply if using the
two way transmitter. If using the one way transmitter while the two way transmit-
ter is within range of the vehicle, the two way transmitter will update it's screen.