Ultra Start 660 Series Automobile Alarm User Manual


 
PAGE 9 OWNER’S MANUAL
SERVICE MODE ICON- This icon indicates the status of the
Service Mode feature. If this icon is present, the system is in Service
Mode.
NOTE: In Service Mode, keyless entry and optional features will
still operate.
?
SHOCK SENSOR ICON* - This icon indicates the status of the
shock sensor. If the icon is present on the LCD screen the shock
sensor is active.
SIREN ICON(Chirp Delete)* - This icon indicates the status of
the chirp delete feature. If the icon is on, the siren will work normally.
If the icon is not displayed the chirp delete feature is on and the siren
will not chirp.
NOTE: Chirp delete disables the Lock and Unlock chirps Only.
NOTE: Dealer Programmable 660 series ONLY.
Programable Icons-The six squares found at the bottom of the
display are user/dealer programmable.
LCD Display (660 & 670)
Setting Vibra Mode (670 ONLY)
To enter: Press and hold the and buttons until the remote transmitter
chimes and the icon is displayed.
To exit: Press and hold the and buttons until the remote transmitter chimes
and the icon is no longer displayed.