Filter
Top Products
Panic Mode
Activating Panic Mode
Press and hold the button for three seconds. The park lights will begin to flash
and the siren will activate.
Disabling Panic Mode
Press and release the or button to disable Panic.
NOTE: Panic mode will stay activated for sixty seconds.
Alarm Functions
1. Press and hold the button. (The button on the 606 series)
2. The park lights will flash and the siren will chirp 1 time.
3. The auxiliary output will stay activated until the button is released.
*Dealer programmable constant, latched or momentary output.
Auxiliary Output Ch 4* (optional)
1. Press and hold the button.
2. The park lights will flash and the siren will chirp 1 time.
3. The auxiliary output will stay activated until the button is released.
Auxiliary Output Ch 5 (optional)
(The button on the 606 series)
NOTE: Auxiliary Output Ch 5 not available on the 670 series.
Trunk Release Ch 3 (optional)
Press and hold the button. The system will disarm, unlock the doors and
continue to hold the button until the trunk release activates.
This will be confirmed by one park light flash and one siren chirp.
Note: The trunk release output will not activate when the ignition key is in the
“On” position.
OWNER’S MANUAL PAGE 4