Filter
Top Products
PAGE 14
95 SERIES
OWNERS MANUAL
REMOTE PROGRAM MODE
ULTRA
M-1234
PROGRAM
ULTRA
TIMER
PROGRAM
ON
ULTRA
PAGER
PROGRAM
ON
ULTRA
VALET
PROGRAM
ON
TO ENTER PROGRAM MODE
PRESS AND HOLD THE STATUS BUTTON ON THE
REMOTE FOR 4 SECONDS.
THE REMOTE WILL BEEP 1 TIME AND THEN 3 TIMES.
THE DISPLAY WILL SHOW “PROGRAM” & “M-1234"
REMOTE PROGRAM MODE ALLOWS THE USER TO SET FEATURES ON OR OFF FROM
THE REMOTE TRANSMITTER. SEE THE INSTRUCTIONS BELOW TO CHANGE A USER
SETTING.
TURN TIMER MODE ON / OFF (TIMER ICON ON/OFF)
PRESS THE LOCK BUTTON TO SELECT TIMER MODE
PRESS THE UNLOCK BUTTON TO TURN ON
PRESS THE START BUTTON TO TURN OFF
TURN PAGER ON / OFF
PRESS THE LOCK BUTTON TO SELECT PAGER MODE
PRESS THE UNLOCK BUTTON TO TURN ON
PRESS THE START BUTTON TO TURN OFF
TURN VALET ON / OFF
PRESS THE LOCK BUTTON TO SELECT VALET MODE
PRESS THE UNLOCK BUTTON TO TURN ON
PRESS THE START BUTTON TO TURN OFF
ULTRA
TIMER
PROGRAM
ON
ULTRA
PAGER
PROGRAM
ON
PRESS LOCK TO GO TO NEXT SETTING OR STATUS TO EXIT.
PRESS LOCK TO GO TO NEXT SETTING OR STATUS TO EXIT.
PRESS LOCK TO GO TO NEXT SETTING OR STATUS TO EXIT.
CONTINUED ON NEXT PAGE...
PRESS LOCK TO GO TO TIMER SETTING OR PRESS STATUS TO EXIT.
PROGRAMMING
ULTRA
CAR 1
PROGRAM
ON
SWITCH FROM CAR 1 TO CAR 2
PRESS THE LOCK BUTTON TO SELECT CAR MODE
PRESS THE UNLOCK BUTTON TO SELECT CAR 1
PRESS THE START BUTTON TO SELECT CAR 2
PAGE 15
95 SERIES
OWNERS MANUAL
REMOTE PROGRAM MODE
ULTRA
TIMER
PROGRAM
ON
ULTRA
SHOCK
PROGRAM
ON
ULTRA
C/F
PROGRAM
ON
TURN HORN CHIRPS ON / OFF
PRESS THE LOCK BUTTON TO SELECT HORN MODE
PRESS THE UNLOCK BUTTON TO TURN ON
PRESS THE START BUTTON TO TURN OFF
TURN SHOCK SENSOR ON / OFF (ALARM MODELS)
PRESS THE LOCK BUTTON TO SELECT SHOCK MODE
PRESS THE UNLOCK BUTTON TO TURN ON
PRESS THE START BUTTON TO TURN OFF
SETS REMOTE TEMPERATURE DISPLAY FROM CELSIUS
TO FAHRENHEIT
PRESS THE LOCK TO SELECT CELSIUS
PRESS THE UNLOCK TO SELECT FAHRENHEIT
ULTRA
HORN
PROGRAM
ON
PRESS LOCK TO GO TO NEXT SETTING OR STATUS TO EXIT.
PRESS LOCK TO GO TO NEXT SETTING OR STATUS TO EXIT.
PRESS LOCK TO GO TO NEXT SETTING OR STATUS TO EXIT.
PROGRAMMING
PRESS LOCK TO GO BACK TO THE FIRST SETTING OR PRESS STATUS TO EXIT.