ADT Security Services ATD-7477 Automobile Parts User Manual


  Open as PDF
of 4
 
ONE YEAR LIMITED WARRANTY
For a period of one (1) year from date of purchase, ATD Tools Inc. will repair or replace, at its option, without
charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited
warranty is a consumer's exclusive remedy.
Performance of any obligation under this warranty may be obtained by returning the warranted product, freight
prepaid, to ATD Tools Inc. Warranty Service Department,160 Enterprise Drive, Wentzville, MO 63385.
Except where such limitations and exclusions are specifically prohibited by applicable law, (1) THE
CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE
PRODUCTS AS DESCRIBED ABOVE. (2) ATD Tools Inc. SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGE OR LOSS WHATSOEVER. (3) ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE
LIMITED TO ONE YEAR, OTHERWISE THE REPAIR, REPLACEMENT OR REFUND AS PROVIDED UNDER THIS
EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. (4) ANY MODIFICATION, ALTERATION, ABUSE,
UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY AND IS NOT COVERED BY THIS
WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not
apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
MAINTENANCE
Periodically inspect the Engine Transverse Bar. Ensure all parts move freely. To help prevent rust, wipe clean and/or
blow dry after each use. If rust appears, sand affected area and cover with suitable utility paint. Store the Engine
Transverse Bar in a clean, dry area.
REPLACEMENT PARTS (Refer to Figure 2 on page 3)
Not all components of the Engine Transverse Bar are replacement items, but are illustrated as a convenient reference
of location and position in the assembly sequence. When ordering parts, give part number and description. Call or write
for current pricing: Atd Tools Inc. 160 Enterprise Drive, Wentzville, MO 63385. Tel:(636)327-9050 Fax:(636)327-9044
Atd Tools Inc.
160 Enterprise Drive,
Wentzville MO 63385
636-327-9050
Item Part# Description Qty
1 - Boom 1
2 - Boom Extension 1
3 * Threaded Hook 2
4 * Wing Nut, M12 1
5 * Hex. Bolt M12x120 1
6 44700-6 Adjustable Leg 1
7 * Barrel Hex. Nut 2
8 * Wing Nut, M8 1
9 * Hex. Bolt M8x65 1
Item Part# Description Qty
10 - Support Arm 1
11 - Transfer Adapter 1
12 44700-12 Braided Steel Cable 2
13 - Leg, Wide 1
14 - Leg, Narrow 1
(*) 44700-15 Hardware Kit -
- ATD7477-L0 Label -
- ATD7477-M0 Manual -
(*) Hardware Kit includes item# 3, 4, 5, 7, 8 & 9
Model Atd-7477
 previous