15
Fitting the Chimney Stack
The chimney consists of two sections. The upper
chimney measures 215mm and the lower chimney
(with the holes for recirculation on either side)
measures 740mm.
- Upper Chimney Stack
- Expand the sides of the upper chimney
stack item 2.1 and place the chimney over
the two brackets 7.2.1 ensuring they are
well seated.
- Secure the chimney stack to the
brackets 7.2.1 using the four self
tapping screws 12c - 2.0x6.5mm.
- Lower Chimney Stack
- Expand the of the lower chimney stack
item 2.2 and place the chimney over the
upper chimney stack item 2.1 and the
canopy item 1.
- Secure the chimney stack to the canopy
using the two screws item 12c -
2.9x6.5mm.
- After the chimney has been secured into
position, insert the two plastic
recirculation grilles item 8a (right-hand)
and 8b (left-hand) in the apertures on
each side of the chimney. The grilles are
marked with two arrows and should be
fitted with one arrow pointing upwards and
the other toward the front.
- When the hood is used in the recirculation
mode ensure that the grilles are properly
secured to the recirculation extension
spigot 14.1.
INSTALLING THE COOKER HOOD
