A SERVICE OF

logo

19
Make the flue slide so that the bend of the section of the lower flue fits into the bend of the fixing
bracket of the mantle (17).
Note: during this operation pull the upper flue out for a few centimetres to ease the fitting
operation.
Extract the upper flue and fix it high on flues support bracket G with 2 screws (one per side - 18).
Fix the flue below with 2 screws (1 per side - 19).
Mount the carbon filter frame (only filtering version) and the anti-fat filter again.
Connect the hood to the mains electricity and check, finally, that it is functioning well.
17
18
18
19
2 x Ø 2,9x6,5
2 x Ø 2,9x6,5