Press the [ARPEGGIO ON/OFF] button to indicate the Track/Slot number in the brackets [ ] at the top of
the LCD.
The [OPTION], [CONTROL], and [ALT] buttons on the Logic Control corresponds to the [EDIT], [JOB],
and [STORE] buttons at left below the LCD respectively.
Additional operations other than those listed above are available. For details, refer to the relevant
documentation of Logic Control.
When controlling Cubase SX:
Functions assigned to [F1] - [F6] and [SF1] - [SF5] buttons
When changing the assigned Effect Type, you need to change the Slot Number or go to another page
and return back to the original page, in order to enable the correct page indication.
Parameters to be edited differ depending on the assigned Effect and Software Tone Generator.
An error message may appear depending on the MIDI related settings.
Additional operations other than those listed above are available. For details, refer to the relevant
documentation of Mackie Control.
INSTRUMENT mode [INSTRUMENT] (Multi Channel View)
[INSTRUMENT] → [INSTRUMENT] (Track Parameter View)
Knobs 1 - 8 (tweaking →
pressing)
Turn the knob to select the desired instrument for insertion
(indication flashes), then press the knob to actually enter the
selected setting.
Knobs 1 - 8 (pressing)
(a Knob to which the Instrument
is assigned)
Calls up the parameter page and opens the Editor window on
Logic.
Knobs 1 - 8 (tweaking)
(Parameter page)
Edits the parameter.
Knobs 1 - 8 (pressing)
(Parameter page)
Resets the edited parameter value to the default. (Please note that
some parameters cannot be reset.)
Cursor [LEFT]
Cursor [RIGHT]
(Parameter page)
Changes the page.
[INSTRUMENT] Return to the INSTRUMENT mode.
Button/Controller Functions
ASSIGNMENT
FADER BANKS
PAN/SEND
PAN/SEND
TONE
ARP FX
FaderGroup
EQ
TONE
TONE
ARP FX
ARP FX
EQ
PAGE UP
PAGE DWN PAN EQ BANK-L BANK-R SHIFT
PLUG-INS DYN DIAL RESET KN1-4/5-8
FLIP
CHANNEL-L CHANNEL-R BANK-L BANK-R SHIFT
EDIT NAME/VALUE DIAL RESET KN1-4/5-8
MASTER
SENDS INSTRUMENTS UNDO REDO SHIFT
SAVE REVERT DIAL RESET KN1-4/5-8
5
1 2 3 4 SHIFT
6 7 8 KN1-4/5-8
F5
F1 F2 F3 F4 SHIFT
F6 F7 F8 KN1-4/5-8
PROJECT
LEFT RIGHT CYCLE PUNCH SHIFT
MIXER SOLO DEFAT DIAL RESET KN1-4/5-8
CURSOR-L
CURSOR-DWN
CURSOR-UP PREV NEXT EDIT SHIFT
CURSOR-R ADD DIAL RESET KN1-4/5-8
Button/Controller Functions
In all modes:
[PAGE UP]
[PAGE DOWN]
Calls up the next/previous page.
[SHIFT]+[PAGE UP] Calls up the first page.
[SHIFT]+[PAGE DOWN] Calls up the last page.
[NAME/VALUE] Changes the indication of the parameter name and its value.
[SEL] Selects a channel.
[MUTE] Mutes or unmutes each channel.
[SHIFT]+[SOLO DEFEAT] Unmutes all channels.
[SOLO] Sets Solo for each channel to on or off.
[SOLO DEFEAT] Sets Solo for all channels to off.
[REC RDY] Sets the REC RDY of each channel to on or off.
[BANK </>] Scrolls through the track indication every eight channels.
[CHANNEL </>] Scrolls through the track indication channel-by-channel.
[FLIP] Switches the functions of the Channel Knobs and Faders.
[EDIT] Opens the Edit window for the currently selected block (AUDIO/
MIDI).
[CYCLE] Turns Loop on or off.
[F1] - [F8] [F1] - [F8] as defined in Cubase SX.
[PROJECT] Brings the Track View window to the front of the computer screen.
[MIXER] Opens the Mixer window.
[SHIFT]+[EDIT] Closes the current window.
[1] – [8] Corresponds to 1 - 8 of the Channel View on the Mixer Window.
[UNDO] Executes the Undo operation.
[REDO] Executes the Redo operation.
[SAVE] Executes the Save operation.
[ADD] Enters/Clears a Marker at the current song position.
[RWD] Hold to continuously rewind.
[SHIFT]+[RWD] Moves the song position to the top of the song.
[PREV] Moves the song position to the previous Marker.
[FF] Hold to continuously fast-forward.
[SHIFT]+[FF] Moves the song position to the end of the song.
[NEXT] Moves the song position to the next Marker. (This may not work in
certain conditions.)
[STOP] Press to stop recording or playback. Pressing this when playback
is stopped goes to the song location at which the song playback
started at last time.
[PLAY] Press to start playback from the current point.
[REC] Press this to start song recording. The [F] (Play) and [I] (Rec)
lamp are turned on during recording.
PAN mode [PAN] (MULTI CHANNEL only)
Knobs 1 - 8 For editing parameters.
EQ mode [EQ] (SELECTED CHANNEL only)
Knobs 1 - 8 For editing parameters.
SEND mode [DYN] (SELECTED CHANNEL only)
Knobs 1 - 8 For editing parameters.
PLUG-IN mode [PLUG-IN] (SELECTED CHANNEL only)
Knob 1 Changes the Slot Number (on page 1 only).
Knob 2 Turns the Effects on or off (on page 1 only).
Knob 3 Selects an Effect Type (on page 1 only).
Knobs 1 - 8 (turning) Edits each of the parameters (on page 2 and later).
SEND EFFECT mode [SENDS]/MASTER EFFECT mode [MASTER] (Global mode only)
Knob 1 Changes the Slot Number (on page 1 only).
Knob 2 Turns the Effects on or off (on page 1 only).
Knobs 1 - 8 Edits each of the parameters (on page 2 and later).
INSTRUMENT mode [INSTRUMENTS] (Global mode only)
Knob 1 Changes the Slot Number (on page 1 only).
Knob 2 Turns the software tone generator on or off (on page 1 only).
Knobs 1 - 8 Edits each of the parameters (on page 2 and later).
Remote Control Assignments
60
Data List
