1
2
Plug phone cord into the filter port
labeled “PHONE”.
Plug the DSL filter into phone jack.
!
When installing DSL filters throughout your household, be sure that you do not plug
any phone device into the filter port labeled “DSL/HPNA” except for your DSL modem.
Note: Leaving this port empty
is normal for all other filters in
your household. Plugging a
phone device into this port will
cause disturbance in your DSL
line, resulting in a slow
connection.
Page 5 of 6
IV. Check your DSL filters
All phone devices throughout your household, such as telephones, fax machines, caller ID boxes, dial up
modems, TV set top boxes, or any other phone device that connects to a DSL phone line will require a
filter. DSL filters prevent noise from disrupting the DSL signal on the phone line. If you don’t have enough
DSL filters for your household, you can purchase more by visiting www.sbcdslstore.com .
