Transient Response: <200µs to within 50mV of set level for 90% load change.
Temperature Coefficient: Typically <100ppm/°C.
Status Indication: Output on lamp. Constant current mode lamp.
METER SPECIFICATIONS (Main Outputs)
Meter Types: Dual 3 digit meters with 14mm (0·56") LEDs. Reading rate 4 Hz.
Meter Resolutions: 100mV, 10mA.
Meter Accuracies: Voltage 0.3% of reading ± 1 digit,
Current 0.6% of reading ± 1 digit.
AUXILIARY LOGIC OUTPUT (XPH 35-4T only)
Voltage: Variable <1·5V to >5V by front panel control.
Meter Voltage Accuracy: 0·3% ± 1 digit
Current Limit: 5A minimum.
Output Protection: Output will withstand up to 7V forward voltage.
Diode clamp reverse protection for currents up to 3A.
Load Regulation: <0·5% for 90% load change.
Line Regulation: <0·1% for 10% line voltage change.
Ripple & Noise
(20MHz bandwidth):
Typically <2mVrms, <10mVpk-pk (CV mode).
Transient Response: Typically <200µs to within 50mV of set level for 90% load change.
Temperature Coefficient: Typically <100ppm/ºC.
Status Indication: UNREG lamp.
GENERAL
AC Input: 110V - 240V AC ± 10%, 50/60Hz. Installation Category II.
Power Consumption: 500VA max.
Operating Range: +5ºC to +40ºC, 20% to 80% RH.
Storage Range:
−40ºC to + 70ºC.
Environmental: Indoor use at altitudes up to 2000m, Pollution Degree 2.
Safety: Complies with EN61010-1.
EMC: Complies with EN61326.
Size: 260 x 160 x 320mm (WxHxD).
Weight: 4·3kg
4
