Liquid bleach dispemer
Always measure bleach. Do not
guess. Never use more than 1 cup
(250 ml) for a full load. Use less with
lower water level settings. Follow
drrectrons on bottle for safe use. Use
a cup with a pouring spout to avord
spilltng
For more information on bleaching
Liquid fabric softener dispe
1. Add detergent and load to the
basket.
2. Add liquid fabric softener to
the dispenser using the amount
recommended on the bottle.
3. Avord dripping or spilling any fab-
ric softener on the load
Cleaning the lint filter
Clean filter after every load for best
filtering results. Note: The load type
will vary the amount of lint build-up.
To clean:
l
Lift off the agitator barrel.
l
Wash or wipe the filter clean in the
bottom of the agitator barrel. The
filter is not removable.
l
Replace the agitator barrel and
snap into place.
1. Load the washer first
2. Pour measured bleach carefully
tnlo dispenser DO NOT let bleach
splash drop or run down into the
washer basket Undiluted bleach
will damage any fabric it touches.
3. Start the washer. Bleach WIII be
drluled automatically during the
wash part of the cycle
see”Laundry Guide” page 11.
iser
4. Dilute fabric softener with hot
water. Add enough hot water to fill
the dispenser up to the opening.
5. Start the washer. Diluted liquid fab-
nc softener will be added to the
load during the deep rinse portion
of the cycle.
NOTE: Do not stop the washer
during this time. If you do, the
softener will mix with the remaining
soapy wash water. This will cause
stains. Do not put detergent in the
liquid fabric softener dispenser.
6. If dispenser needs cleaning, flush
with hot water. NOTE: Do not wash
clothes with dispenser removed.
