1. POWER button - Turns the UHF-3800 ON/OFF.
2. POWER LED indicator - Glows BLUE when the receiver is powered ON.
3. RF/AF LED indicator - Lights RED when RF signals are received from the
microphone channels and output to external devices.
4. VOLUME controls - These controls adjust the VOLUME level for each MIC channel.
5. RF ANTENNAS - Provides RF SIGNAL reception to the RECEIVER.
6. 1/4" AUDIO OUT (MIXED A-B) - This ΒΌ" unbalanced OUTPUT jack is for output
connection to amplifiers, effects devices or mixers. Both Mic channels are output
through this jack for mixed output.
7. XLR AUDIO OUT (SEPARATE A-B) - These XLR balanced OUTPUT jacks are for
output connections to amplifiers, effects devices and/or mixers. These are for
separate mic channel connections with unmixed mic output.
8. CHANNEL SELECTOR - This selects one of the four dual-channel frequency pre-sets. The receiver
and mics must all be set to the same pre-set. For example, if this is set to "1", both mics must
also have their channels set to "1" to work.
9. FUSE terminal - This terminal houses the system fuse. Only replace with same
type/rating of fuse.
10. VOLTAGE selector - Selects between 110-120V and 220-240V power settings.
11. AC POWER terminal - MAINS POWER jack for connection to a compatible
AC outlet.
POWER
LEVEL-A LEVEL-B
AF AF
-30 -15 -5 0 +5 +15 -30 -15 -5 0 +5 +15
8-Channel Dual UHF Wireless Microphone System
ANT-A ANT-B
15
6
7
9 1 0 1 1
2
3
4
5
8-Channel Dual UHF Wireless Microphone System
SERIAL NO:
FREQUENCY
AUDIO OUTPUT
MIXED A/B MIC-B
BALANCED OUTPUT
MIC-A
UNBALANCED
A:
564.2-575.9Mhz
B:
545.2-554.6Mhz
CHANNEL 1234
110V
DC 12V 2A FUSE AC INPUT
AC:
110V/240V
50/60Hz
1.5A
!
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
CAU TION:TO REDUCE THE RISK OF
FIRE. REPLACE ONL
Y WITH THE SAME TYPE
AND RATING OF FUSE
ATE NT ION:UTILISER UN FUSIBLE DE
RECHANGE DE MEMETYPE
AC110V AC240V
VOLTAGE SELECTOR
www.vocopro.com
L A V E RNE CAL IF OR NIA
U. S . A
Front and Rear Panel Descriptions
Front and Rear Panel
8
8
