Page 27Phantom PS1000
10.12 SCANNING
Allows the user to select the scan type from Memory scan or Priority scan.
“Memory scan” scans the channels that were programmed into memory. “Pri-
ority scan” scans the channels programmed in memory with the priority chan-
nel.
10.12.1 Selecting the Scan Type
Operator can select which is the scanning feature start the “Memory Scan
(
M-
SCAN
)
” or “Priority Scan
(
P-SCAN
)
” when pressing the
[
SCAN
]
key.
1. Press and hold down the
[
CALL
(
SET
)
MENU
]
key
until “RADIO SETUP” menu appears.
2. Press the
[
CALL
(
SET
)
MENU
]
key, then press the
[
]
key to select “SCAN TYPE” menu.
3. Press the
[
CALL
(
SET
)
MENU
]
key.
4. Press the
[
]
or
[
]
key to select “PRIORITY” or
“MEMORY.”
5. Press the
[
CALL
(
SET
)
MENU
]
key to store the se-
lected setting.
6. To exit this menu and return to radio operation mode press
the
[
16/9
]
key.
You may start the non-selected scanning feature which is determined above
procedure by press and holding the
[
SCAN
]
key while activating the Scanner.
10.12.2 Memory Scanning
(
M-SCAN
)
1. Set the squelch level to the “squelch threshold” (the background noise is
muted).
2. Select a desired channel to be scanned using the
[
]
or
[
]
key, then press and hold the
[
SCAN
]
key. “MEM” will appear
on the LCD which indicates the channel has been pro-
grammed into the transceivers memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver’s memory, select the channel
then press and hold the
[
SCAN
]
key, “MEM” will disappear in the LCD.
5. To start scanning, press the
[
SCAN
]
key momentarily.
“M-SCAN” appears on the LCD. Scanning will proceed from
the lowest to the highest programmed channel number and
will stop on a channel when a transmission is received.
6. The channel number will blink during reception.
7. To stop scanning, press the
[
SCAN
]
,
[
CALL
(
SET
)
MENU
]
,
[
WX
]
,
[
16/9
]
,
[
DIS-
TRESS
]
, or PTT key.
