VerteX RTH Series H.8 and H.16 Series
45
[Figure 5-32 Letter Input Window]
B. Covert
Used to hide the video channel on the real-time monitoring screen.
Video data are saved on the real-time monitoring screen even
though they are not displayed in black.
C. Connection
Used to set whether to connect or disconnect each camera channel.
When the camera channel is set to disconnected, the video contents will
not be displayed even if the camera is actually connected.
B) Recording Resolution
Used to set the resolution of the recorded channel.
Resolution by Video Type
Type
Resolution
NTSC PAL
CIF
352 240 352 288
Field
704 240 704 288
Full
704 480 704 576
C) Recording Quality
Used to set the quality of the recorded video. Select among five levels {Lowest} / {Low} / {Middle} / {High} /
{Highest}.
The higher quality requires the bigger file size.
D) Mode
Used to set the recording type for the channel.
Recording Type Description
Automatic
Set the event recording speed and normal recording speed separately. Recording is
carried out by automatically selecting the recording mode based on each setup value.
Continuous
Continuous recording is done based on the normal frame value.
Motion
Recording is done based on the event frame setting in case motion is detected.
Sensor
If input signal is generated from an external sensor, recording is done based on the
event frame setting.
Recording Conditions
