A SERVICE OF

logo

Open as PDF
next previous
33
• Start Port - Enter the beginning of the range of port numbers used by
outgoing traffic for this application. Use as many rows as necessary to
define the required number of port ranges. Unused rows can be left blank.
• End Port - Enter the end of the range of port numbers. For as single port
(rather than a range), enter the same value for both the Start Port and End
Port.
• Protocol - For each port range (each row), select the protocol (TCP, UDP, or
both) used by that port range.
Saving your Changes
You can define all required applications before clicking the “Apply” button.
Use the “Ports” and “Hide” links as necessary to open and close the Port Definition Panel so you
can define the ports for each application as needed.