TWA-PRC001-EN4
Features and
Benefits
Heat Pumps
• 3-D
®
Scroll compressors
• Model TWA155-200B have dual
compressors with independent
refrigerant circuits
• Compressor motor overload protection
• Control transformer
• High and low pressure cut-out
switches
• Internal pressure relief valve
• Liquid line filter drier, factory installed
• Holding charge of dry nitrogen
• Copper tube, aluminum plate fin coils
• Low ambient cooling to 35° F (1.7° C)
as manufactured
• Weather resistant baked enamel finish
• Heavy gauge steel cabinet
• Mounting/lifting rails under base
All condensing units offer these optional
accessories:
• Head Pressure Control — Low Ambient
Cooling To 0° F (-17.8° C)
• Coil Guards Kits
• Isolators both Rubber-in-Shear and
Spring Type
• Anti-Short-Cycle Kit
• Time Delay Relay
Air Handlers
• Low voltage terminal board
• Expansion valve(s)
• Convertible
• PVC double-sloped, removeable drain
pan
• Fan relay
• Efficient evaporator coil
• Baked enamel finish
• Filter access panel
• 1” (25.4 mm) throwaway filters
standard with provisions for field
supplied 2”
(50.8 mm) filters
• Adjustable belt drive motor
• Single point power entry to electric
heaters
• Refrigerant piping and/or electrical
connections provided from either side
Odyssey
™
air handler versatility is further
increased by a complete line of optional
accessories designed to match and easy
to install:
• Discharge Plenum and Grille
• Return Grille
• Subbase
• Electric Heaters
• High Static Evaporator Motor
• Isolators both Rubber-in-Shear and
Spring Type
