1-6
1 Introduction Model 3000TA-XL-EU
Teledyne Analytical Instruments
• RS-232 Port Serial digital concentration signal output
and control input.
• Remote Probe Used in the 3000TA-XL for controlling
external solenoid valves only.
• Remote Span/Zero Digital inputs allow external control of
analyzer calibration.
• Calibration Contact To notify external equipment that
instrument is being calibrated and
readings are not monitoring sample.
• Range ID Contacts Four separate, dedicated, range relay
contacts. Low, Medium, High, Cal.
• Network I/O Serial digital communications for local
network access. For future expansion.
Not implemented at this printing.
Note: If you require highly accurate Auto-Cal timing, use external
Auto-Cal control where possible. The internal clock in the
Model 3000TA-XL is accurate to 2-3 %. Accordingly, internally
scheduled calibrations can vary 2-3 % per day.
