35
Model 428 Limited Warranty on P arts
LIMITED WARRANTY EXCEPTIONS
This limited war ranty does not
cover:
1. Labor or other costs incurred for diagnosing, repairing, removing, installing, shipping, servicing or handling o f
defective Parts, replacement Parts, or new Parts.
2. Normal maintenance, cleaning and lubrication a s outlined in the Taylor Operator’s Manual, including c leaning
of condensers o r carbon and grease buildup.
3. Required service, whether c leaning or general repairs, to return the cooking surface assemblies, including
the upper platen and lower plate, to an operational c ondition to ac hieve proper cooking or allow proper
assembly of release sheets and clips a s a result of grease build-up on the cooking s urfaces, including but
not limited t o the platen and plate, sides of the s hroud or top of the shroud.
4. Replacement of cooking surfaces, including the upper platen and lower plate, due to pitting or corrosion (or
in t he case of t he upper platen, due to los s of plating) as a result of damage due to the impact of spatulas or
other small wares used during the c ooking process or as a result of the use of cleaners, cleaning m aterials
or cleaning processes not approved for use by Taylor.
5. Replacement of wear items des ignated as Class “ 000” Parts in the Taylor Operator’s Manual, a s well a s any
release sheets and clips for the P roduct’s upper platen as sembly.
6. External hoses, electrical power supplies, and machine grounding.
7. Parts not supplied or designated by Taylor, or damages r esulting from their u se.
8. Return trips or waiting time required bec ause a service technician is prevented from beginning warranty
service work promptly upon arrival.
9. Failure, damage or repairs due to faulty ins tallation, misapplication, abuse, no or improper servicing,
unauthorized alteration or improper operation or use as indicated in the Taylor Operator’s Manual, i ncluding
but not limited to the f ailure to us e proper assembly and cleaning techniques, tools, or approved cleaning
supplies.
10. Failure, damage or repairs due to theft, vandalism, wind, r ain, flood, high water, water, lightning, earthquake
or any other natural disaster, fire, corrosive environments, insect or rodent infestation, or other casualty,
accident or c ondition beyond the reasonable control o f Tay lor; oper ation above or below the gas, electrical or
water supply specification of the unit in which a part is installed; or Parts or the units in which they ar e
installed repaired or a ltered in any way so as, in the judgment of Taylor, to adv ersely affect performance, or
normal wear or deterioration.
11 . Any Part purchased over the Internet.
12. Failure to start due to voltage conditions, blown fuses, open circuit breakers, or dam ages due to the
inadequacy or interruption of electrical service.
13. Electricity, gas or other fuel c osts, or increases in electricity or fuel costs from any reason whatsoever .
14. Damages resulting from the use o f any refrigerant other than that s pecified f or the unit in which the Part is
installed will void this limited warranty.
15. Any cost to replace, refill or dispose of refrigerant, including t he cost of refrigerant.
16. ANY SPECIAL, INDI RECT OR CONSEQUENTIAL PROPERTY OR COMMERCIAL DAMAGE OF ANY
NATURE WHATSOEVER. Some jurisdictions do not allow the exclusion of incidental or consequential
damages, so t his limitation may not apply to you.
This limited war ranty g ives you s pecific legal rights, and you m ay also have other rights which vary f rom
jurisdiction to jurisdiction.
