Chapter 6 Installing Windows Server 2003 33
Note – The prompt is displayed in the early stages of Windows Setup and lasts for
approximately five seconds and is easy to miss. If you do not press F6 while the
prompt is being displayed, the screen allowing you to specify additional drivers is
not displayed and the installation will fail. You will need to restart the system and
go back to Step 3.
After pressing F6, a screen will appear providing you with the option to specify
additional mass storage devices.
FIGURE 6-4 Specify Additional Device Screen
7. Make sure that the mass storage drivers are accessible according to the mass
storage driver installation method that you have selected.
■ Floppy Disk Local: Mass storage drivers floppy disk in floppy drive A
attached to the server
■ Floppy Disk Remote: Mass storage drivers floppy disk in the JavaRConsole
server floppy drive
■ Floppy Image (only supported for server modules using ILOM): the
smi.img vailable on the JavaRConsole system
