35
EN
Recording cannot be erased completely.
m The erase head is contaminated.
m CrO
2
(TYPE II) or metal (TYPE IV) tape is used.
Tape speed is too fast or too slow in the playback
mode.
m Improper setting of the TAPE SPEED selector. Set
it to the same speed as that used for recording.
m DPC is set at a point other than the center.
While operating, some noise is heard.
m The counter reset button is pressed incorrectly.
Press it correctly to set to 000.
When the tape has reached the end after fast
forward or rewind, noise is heard.
m The unit is not in stop mode. Press p STOP.
The sound is not normal when playing back a tape
other than a 4-track tape.
m Set TAPE TRACK to 1-2.
m You cannot play back a stereo-recorded tape with
this cassette-corder (see page 16).
