14
GB
4 Press MENU/NO on the remote.
5 Press TUNING – or + (or – or + on the
remote) repeatedly until “Memory?”
appears, then press ENTER/YES on the
remote.
A preset number appears.
Do steps 6 and 7 when the preset number is
flashing.
6 Press TUNING – or + (or – or + on the
remote) repeatedly to select the desired
preset number.
7 Press ENTER/YES on the remote.
“Complete!” appears.
The station is stored.
8 Repeat steps 1 through 7 to store other
stations.
Tip
Press TUNING MODE on the remote when you want
to stop scanning.
Setting presets through
manual tuning
1 Press TUNER/BAND (or TUNER BAND
on the remote) repeatedly to select
“FM” or “AM”.
2 Press TUNING MODE on the remote
repeatedly until “MANUAL” appears.
3 Press TUNING – or + (or – or + on the
remote) repeatedly to tune in the
desired station.
4 Press MENU/NO on the remote.
5 Press TUNING – or + (or – or + on the
remote) repeatedly until “Memory?”
appears, then press ENTER/YES on the
remote.
A preset number appears.
Do steps 6 and 7 when the preset number is
flashing.
6 Press TUNING – or + (or – or + on the
remote) repeatedly to select the desired
preset number.
7 Press ENTER/YES on the remote.
“Complete!” appears.
The station is stored.
8 Repeat steps 1 through 7 to store other
stations.
Other operations
To Do this
Tune in a station
with a weak
signal
Follow the procedure described in
“Setting presets through manual
tuning”.
Stop setting
presets
Press MENU/NO on the remote in
step 5 or 6.
Change the
preset station
Start over from step 1.
Presetting radio stations (continued)
