Playing CDs
11
Creating Your Own Program
(Program Play)
You can arrange the order of the tracks on the discs
and create your own program. The program can
contain up to 32 tracks.
( PROGRAMDISC 1 – 5
Number buttons >10
2 Press DISC 1 – 5 to select the disc.
p
PROGRAM
>20
DISC 1 – 5
Number
buttons
CLEAR
p
(
RM-D645 for CDP-CA9ES
CHECK
CLEAR
Number
buttons
DISC 1 – 5
PROGRAM
>20
CHECK
(
p
1 Press PROGRAM.
“PROGRAM” appears in the display.
If a program is already stored, the last step of the
program appears in the display. When you want to
erase the whole program, hold down CLEAR on
the remote until “ALL␣ CLEAR” appears in the
display (see page 12).
12345
DISC
PROGRAM
TRACK
MIN SEC
12345
678910
A
“AL” in the display stands for “all” tracks.
When you want to program the whole disc as one
step, skip Step 3 and go to Step 4.
3 Press the number buttons of the tracks you want to
program in the order you want.
To program the track numbered over 10 (or 20
when using the remote), use the >10 button (or >20
on the remote) (see page 9).
RM-D515 for CDP-CA8ES
After one second
Total playing time
12345
DISC
PROGRAM
TRACK STEP
25
8
A
12345
DISC
PROGRAM
TRACK
MIN SEC
25
8
A
Playing order
Last programmed track
Programmed
tracks
If you’ve made a mistake
Press CLEAR on the remote, then press the correct
number button.
4 To program other discs or tracks, do the following:
To program
Other discs
Other tracks on the same disc
Other tracks on other discs
5 Press ( to start Program Play.
To cancel Program Play
Press CONTINUE.
Repeat Step(s)
2
3
2 and 3
