22 (GB)
Specifications
SDM-G76D
LCD panel Panel type: a-Si TFT Active Matrix
Picture size: 17.0 inch
Input signal format RGB operating frequency*
Horizontal: 28–80 kHz (analog RGB)
28–64 kHz (digital RGB)
Vertical: 56–75 Hz (analog RGB)
60 Hz (digital RGB)
Resolution Horizontal: Max.1280 dots
Vertical: Max.1024 lines
Input signal levels Analog RGB video signal
0.7 Vp-p, 75 Ω, positive
SYNC signal
TTL level, 2.2 kΩ,
positive or negative
(Separate horizontal and vertical)
Digital RGB (DVI) signal:
TMDS (Single link)
Power requirements 100–240 V, 50–60 Hz,
Max. 1.0 A
Operating temperature 5–35
°C
Dimensions (width/height/depth)
Display (upright):
Approx. 383.5
×
404.5
×
163 mm
(15
1
/8 × 16 × 6
1
/2 inches)
Mass Approx. 5.1 kg (11 lb 3
7
/8 oz)
Plug & Play DDC2B
Accessories See page 7.
SDM-G96D
LCD panel Panel type: a-Si TFT Active Matrix
Picture size: 19.0 inch
Input signal format RGB operating frequency*
Horizontal: 28–80 kHz (analog RGB)
28–64 kHz (digital RGB)
Vertical: 56–75 Hz (analog RGB)
60 Hz (digital RGB)
Resolution Horizontal: Max.1280 dots
Vertical: Max.1024 lines
Input signal levels Analog RGB video signal
0.7 Vp-p, 75 Ω, positive
SYNC signal
TTL level, 2.2 kΩ,
positive or negative
(Separate horizontal and vertical)
Digital RGB (DVI) signal:
TMDS (Single link)
Power requirements 100–240 V, 50–60 Hz,
Max. 1.0 A
Operating temperature 5–35
°C
Dimensions (width/height/depth)
Display (upright):
Approx. 422.5
×
435.5
×
163 mm
(16
3
/4 × 17
1
/4 × 6
1
/2 inches)
Mass Approx. 5.6 kg (12 lb 5
1
/2 oz)
Plug & Play DDC2B
Accessories See page 7.
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
