53
MHC-GRX10AV (Other models):
The following measured at AC 120, 220, 240 V
50/60 Hz
Front Speaker:
DIN power output (rated)105 + 105 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
130 + 130 watts
(6 ohms at 1 kHz,
10% THD)
Center Surround Speaker:
DIN power output (rated)20 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
25 watts
(8 ohms at 1 kHz,
10% THD)
Rear Surround Speaker:
DIN power output (rated)10 + 10 watts
(16 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
12.5 + 12.5 watts
(16 ohms at 1 kHz,
10% THD)
Peak music power output (reference)
2000 watts
Inputs
VIDEO IN: voltage 250 mV,
(phono jacks) impedance 47 kilohms
MD IN: voltage 450 mV,
(phono jacks) impedance 47 kilohms
MIX MIC: (phone jack) sensitivity 1 mV,
impedance 10 kilohms
Outputs
MD OUT: voltage 250 mV
(phono jacks) impedance 1 kilohms
PHONES: accepts headphones of 8
(stereo phone jack) ohms or more
FRONT SPEAKER: accepts impedance of 8 to
16 ohms
REAR SURROUND SPEAKER:
accepts impedance of 16
ohms
CENTER SURROUND SPEAKER:
accepts impedance of 8
ohms
SUPER WOOFER: Voltage 1 V, impedance 1
kilohms
Amplifier section
MHC-RX110AV (Canadian models):
Front Speaker:
Continuous RMS power output (reference)
120 + 120 watts
(8 ohms at 1 kHz,
10% THD)
Total harmonic distortion less than 0.07%
(8 ohms at 1 kHz, 65 W)
Center Surround Speaker:
Continuous RMS power output (reference)
25 watts
(8 ohms at 1 kHz,
10% THD)
Rear Surround Speaker:
Continuous RMS power output (reference)
12.5 + 12.5 watts
(16 ohms at 1 kHz,
10% THD)
MHC-RX110AV (European and Russian models):
Front Speaker:
DIN power output (rated)80 + 80 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
100 + 100 watts
(8 ohms at 1 kHz,
10% THD)
Music power output (reference)
170 + 170 watts
(8 ohms at 1 kHz,
10% THD)
Center Surround Speaker:
DIN power output (rated)20 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
25 watts
(8 ohms at 1 kHz,
10% THD)
Music power output (reference)
45 watts
(8 ohms at 1 kHz,
10% THD)
Rear Surround Speaker:
DIN power output (rated)10 + 10 watts
(16 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
12.5 + 12.5 watts
(16 ohms at 1 kHz,
10% THD)
Music power output (reference)
20 + 20 watts
(16 ohms at 1 kHz,
10% THD)
Specifications
continued
