4
Chapter 4 Adjustments and Settings for Recording 4-63
4-8 Paint Menu
The PAINT menu contains various detail adjustment items such as white
clipping. It also enables you to save up to five sets of detail-adjusted
data customized to certain shooting scenes (SCENE FILE page).
For information about how to set items, see Section 4-5-1 “Basic Use of the Setup
Menu” (page 4-31).
For detailed information on the Paint Menu, refer to the Maintenance Manual.
Selecting the PAINT menu
1 While pushing the MIC/MENU knob, change the DISPLAY switch
from OFF to MENU.
The TOP menu screen will appear.
2 Turn the MIC/MENU knob to move the arrow (→) until it points to
PAINT.
3 Push the MIC/MENU knob.
The PAINT menu screen will appear.
To return to the TOP menu from the PAINT menu
The following two methods are available:
• Point the arrow (→) to TOP on the right top on each page, then press
the MIC/MENU knob.
• Push the MENU switch to the CANCEL side twice.
TOP MENU
,
∗∗
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
