81
GB
Printing from your computer
Using your printer with Macintosh computers
The supplied software enables you to print an image from your Macintosh
with the Digital Photo Printer DPP-SV77. To print an image from the
computer, you need a commercially available printing software application.
System requirements
To use the supplied software, you need a Macintosh computer that must meet
the following system requirements.
OS: Mac OS 8.5.1/8.6/9.0/9.1 should be pre-installed.
Port: A USB port should be installed as standard.
RAM: 32 MB or more (64 MB or more is recommended.)
Hard disk space: 50 MB or more (depending on the number of copies to
be printed.)
Drive: CD-ROM drive (for software installation)
Notes
• We cannot guarantee the printer operations when a hub is used or when two or more
USB devices are connected to your computer.
• If you connect more than one DPP-SV77 printer at the same time, you cannot operate
the printer.
• You cannot operate the printer from another USB device being used simultaneously.
Installing the printer driver
Install the Sony DPP-SV77 Printer Driver Software Ver. 1.0 for Mac OS 8.5.1/
8.6/9.0/9.1 (“printer driver” in this manual) into your Macintosh.
1 Connect your Macintosh and the printer.
For the connections, refer to “Connecting to a computer (optional)” on
page 16.
2 Turn on the printer and start your Macintosh.
Note
Close all programs before running the installer.
Continued
