Chapter 3 Basic Operation
3-22
Chapter 3 Basic Operation
3D mapping effects
These effects use nonlinear image processing techniques. They include 3D
page turn, 3D beveled edge, and so on.
Note
Using 3D mapping effects requires the optional BKDF-712 3D Video
Mapping Effects Board.
Using the three-picture cube effect also requires the optional BKDF-711
2nd Channel DME Board.
3D wave
3D page turn
3D beveled edge
Selecting an Effect
Three-picture cube
Multi-cube
3D cylinder
Chapter 3 Basic Operation
Chapter 3 Basic Operation
3-23
Selection in Direct Pattern Selection Mode
In the direct pattern selection mode, pressing any button (other than INS,
DEL, UP, DOWN, or ENTER) in the pattern/numeric keypad directly
selects an effect pattern.
For details of the effects assigned by factory default to the buttons in the pattern/
numeric keypad, see the previous section “Example Effects” (page 3-18).
Procedure
To select an effect pattern in the direct pattern selection mode, use the
following procedure.
Note
If the EDIT button in the user program section (see page 2-11) is lit, first
press it, turning it off.
1
Press the DIRECT PATTERN button, turning it on.
The unit is now in direct pattern selection mode.
2
In the pattern/numeric keypad, press the button assigned to the desired
effect pattern, turning it on.
This selects the effect assigned to the button, and the pattern number
appears in the PATTERN NUMBER display window.
