www.smoothfitness.co.uk 19
ASSEMBLY
STEP 2: Assemble Upright Frame
NOTE : Make sure all wires are recessed into the frame , DO NOT trap
or pinch (Hand tight bolts until last step )
A) Raise the left and right uprights (301 X 2 ) .
B) Secure the left upright (301) with two 8x18 mm Allen bolts (810) and
two # 8 washer through the front side of the base frame . hand tighten .
C) Secure the right upright (301) with two 8x18 mm Allen bolts (810)
and two # 8 washer through the front side of the base frame . hand
tighten .
D) Insert one M 8x52 mm Allen bolt (811) and one # 8 washer through
the side of the base frame and the left upright , hand tighten .
E) Insert one M 8x52 mm Allen bolt (811) and one # 8 washer through
the side of the base frame and the right upright , hand tighten .
F) Tighten all Allen bolts with Allen wrench C (Provided with hardware).
811
X2
810
X4
812
X6
301
810
812
811
812
fig-1
