SMOOTH 7.1HR POWER FOLDING TREADMILL
Visit us at: www.smoothfitness.com
COMPUTER OPERATION
Body Fat Analysis Button A
B Recovery Rate Button
STOP/ENTER Button C
D SPEED Buttons
Safety Key E
F INCLINE Buttons
START Button G
H RESET Button
LCD 2 Window I
J LCD 1 Window
BUTTONS:
START - Press to start exercise at initial speed of 0.5mph.
STOP/ENTER -
a. Press to confirm program and preset function values under setting mode.
b. Press to run setting procedure before pressing the START key.
c. Press to stop exercise during workout time.
SPEED UP -
a. Press to increase exercise speed by 0.1mph.
b. Hold the button to increase rapid speed by 0.5mph per second and release the button to stop the function.
c. Press to select programs and preset related function value.
SPEED DOWN -
a. Press to decrease exercise speed by 0.1mph.
b. Hold the button to decrease rapid speed by 0.5mph per second and release the button to stop the function.
c. Press to select program and preset related function value.
INCLINE UP/DOWN SWITCH - Press up or down to change incline level.
SAFETY KEY:
The safety key must be inserted into the slot on the console in order to operate the treadmill. Always insert the safety key
and attach the clip to your clothing at your waist before beginning your workout. If you should encounter problems and need
to stop the motor quickly, simply pull on the cord to disengage the safety key from the console. To continue operation simply
turn the power switch to off, set the speed controller to stop and then reinsert the safety key into the console.
